AGM Global Vision ASP, User Manual

Page: 17 / 32

17 ASP
USER MANUAL
Select Numeric Only for a numerical representation of the temperature data on the display. The
current temperature of the object or scene in the center of the field of view will be printed on the
display.
Select Thermometer Only for a graphical representation of the temperature data on the display.
The current temperature of the object or scene in the center of the FOV will be indicated by a
graphical thermometer.
Select Numeric-Thermometer item for both numerical and graphical representation of the
temperature data on the display.
Reticle Menu
The RETICLE menu (Figure 2-11) allows the user to select from a choice of reticle patterns: Dot 4
MOA, Line Dot, Cross Center Dot, Cross, Crosshair.
To select the reticle type push the LEFT or RIGHT button. Push the OK button to confirm selection.
> EXIT
<> CROSS
RETICLE
FIGURE 2-11. RETICLE MENU
Boresight Menu
The boresight function allows the user to changing the reticle position in the display. Figure 2-152
shows the BORESIGHT screen.
Push the LEFT and RIGHT buttons to adjust for windage. Push the UP and DOWN buttons to adjust
for elevation.
Every time one of these buttons is pushed, the reticle shifts a single pixel increment. Every time
one of these buttons is pushed for 3 sec, then the reticle begins to shift in 4 pixels increments
untill you let go.
Holding down the combination of buttons (LEFT+RIGHT) to reset to zero azimuth and elevation
the reticle will shift to the display center.
TEMPERATURE
> EXIT
DISPLAY OFF
NUMERIC ONLY
THERMOMETER ONLY
NUMERIC-THERMOMETER
FIGURE 2-10. TEMPERATURE MENU