background image

4

AGM Global Vision

SAFETY SUMMARY

The proper usage of the device is important for safe exploitation! 

Therefore read carefully the present manual!

WARNING: 

If the device was left in storage for a longer period of time, before exploitation check 

its functionality.

WARNING: 

Disassembling of the device is prohibited, except in authorized repair centers.

WARNING:

The external optical surfaces should be clean at all times. Touching the optical 

surfaces with bare hands is not recommended.

WARNING:

Sand and sea water can damage the optical coatings!

WARNING:

Do not point the device directly at the sun!

WARNING:

Image performance is dependent on scenery and atmosphere conditions. Contrast in 

the same image may vary as a function of the time of day due to the effect of the sun. 

For example, at sunset objects will have absorbed different levels of heat resulting in 

greater temperature differences and better contrast.

WARNING:

When left in storage for a longer period of time, batteries have to be removed and 

stored in polyethylene bags to prevent contact with metal.

WARNING:

When carrying or transporting the device, put the protective lens cap!

WARNING:

Condensation can cause fogging of the optical surfaces! Condensation occurs when 

the temperature or humidity changes as follows:

– When moving the device from cold to warm place or vice versa;

– In places with high humidity.

When equalizing the temperature of the device with the environmental, the condensa-

tion disappears. Use the towel to remove moisture.

WARNING:

Clean the lens surfaces with the lens cloth or with the napkin!

LEGAL NOTICE:

Before attaching to weapons, check the regional legal regulations in the area of ap-

plication. The attachment to a weapon is always the sole responsibility of the user.

Summary of Contents for ANACONDA-MICRO

























Reviews: