18
AGM Global Vision
3. Open the app. Once the app is open it may ask to setup. After setup the home screen
will be shown.
4. In the home screen there is a large circular button in the center that says ‘Connect
Cam802’. Press that button to start streaming the live thermal view to smartphone.
There will be several icons at the bottom of the screen that will allow to record,
take photos, and review them as well. Photo and video records will be saved on the
smartphone.
Capture Snapshots and Video Recording by Cam802 Application:
1. Turn on Wi-Fi function of Anaconda-Micro. Wait for 10 seconds.
2. Press the Photo Camera icon on application main screen to take a photo. Do not
press too quickly, always wait until image number disappears before taking next photo.
3. Press the Video Camera icon on application main screen to record a video. Always
wait until video is saved before starting the next recording.
4. Wait another 10 seconds before turn the Wi-Fi function off.
NOTE
Do not take photos/videos while the device is connected with PC. Otherwise the
photos/videos will not be actually saved.
2.3.7 ELECTRONIC ACCURACY CORRECTION
Adjust the electronic accuracy correction as follows:
1. Aiming your daytime scope to the middle of target and shoot. This is test process of
control good daytime scope accuracy.
2. Install the Anaconda-Micro on the rifle scope. Aim to the thermal target and shoot
again.
3. Measure horizontal distance (X) and vertical distance (Y) between shoot and aiming
position from step 2.
CAPTURE SNAPSHOT
RECORD VIDEO
PHOTO GALLERY
VIDEO GALLERY
