Tilt Stand
Safety Information
The instrument can be raised to a standing position by means
of a tilt stand.
This instrument is safety and EMC certified in
compliance with:
• IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)
• Canada: CAN/CSA-C22.2 No. 61010-1-04
• USA: ANSI/UL 61010-1:2004
• IEC61326-2-1:2005/EN61326-2-1:2006
• Canada: ICES-001:2004
• Australia/New Zealand: AS/NZS CISPR11:2004
Measurement Category II 150 V, Pollution Degree 2.
Use with standard or compatible test probes.
Safety Notices
A
CAUTION
notice denotes a hazard. It calls
attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to,
could result in damage to the product or loss of
important data. Do not proceed beyond a
CAUTION
notice until the indicated conditions are fully
understood and met.
WA R N I N G
A WARNING notice denotes a hazard. It calls attention
to an operating procedure, practice, or the like that, if
not correctly performed or adhered to, could result in
personal injury or death. Do not proceed beyond a
WARNING notice until the indicated conditions are
fully understood and met.
Safety Symbols
CAT II
150 V
Category II 150 V overvoltage protection
Double insulation
Earth ground
Caution, risk of danger
Caution, risk of electric shock
For further safety information details, refer to the
U1401A Handheld Multi- Function
Calibrator/Meter User’s and Service Guide
.
U1401A QSG.fm Page 7 Tuesday, May 15, 2012 11:10 AM