1-6
Installing the Test Set
Step 2. Set Up the PNA
Step 2. Set Up the PNA
1.
Using the PNA Installation and Quick Start Guide, set up the network analyzer.
2.
If you are installing your PNA in an equipment rack, be sure to leave at least 2 rack
units of space
below
the analyzer to install the test set.
NOTE
For the N4420B or N4421A/B test set, connect the PNA to the test set
before placing in the rack as a single unit on one set of rails. Refer to
3. Attach the PNA to the Test Set” on page 1-7
for instructions.