21
Infiniium 9000 Series performance characteristics
Trigger: digital channels MSO Models
Threshold range (user defined)
±8.0 V in 100-mV increments
Threshold accuracy
±(100 mV + 3% of threshold setting)
Measurements and math
Waveform measurements
(can be made on either min or zoom window with up to 10 simultaneous measurements
with statistics)
Voltage (scope channels)
Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, V overshoot,
preshoot, V
preshoot, upper, middle, lower, crossing point voltage , pulse top, pulse base, pulse
amplitude
Time (digital channels)
Period, frequency, positive width, negative width, duty cycle, delta time
Time (scope channels)
Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt,
channel-to-channel delta time, channel-to-channel phase , count pulses , burst width, burst period,
burst interval, setup time, hold time
Mixed (scope channels only)
Area, slew rate
Frequency domain
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude
Level qualification
Any channels that are not involved in a measurement can be used to level-qualify all timing
measurements
Eye-diagram measurements
Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Measurement modes
Statistics
Displays the mean, standard deviation, minimum, maximum range, and number of measurement values
for the displayed automatic measurements
Histograms (scope channels)
Source
Waveform or measurement (histogram on measurement requires EZJIT, EZJIT+, or EZJIT Complete
option)
Orientation
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes,
regions are defined using waveform markers
Measurements
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total
hits, peak (area of most hits), X scale hits, and X offset hits
Marker modes
Manual markers, track waveform data, track measurements
Waveform math
Number of functions
16
Operators
Absolute value, add, AM demodulation, average, horizontal gating, Butterworth
2
, common mode, dif
ferentiate, divide, FFT magnitude, FFT phase, FIR
11
, high pass filter, integrate, invert, LFE
2
, low pass
filter (4th-order Bessel Thompson filter), magnify, max, min, multiply, RT Eye
2
, smoothing,
SqrtSumOfSquare
2
, square, square root, subtract, versus
Chartstate (MSO models), charttiming (MSO models)
Automatic measurements
Measure menu access to all measurements, ten measurements can be displayed simultaneously
Multipurpose
Front-panel button activates up to ten pre-selected or ten user-defined automatic measurements
Drag-and-drop
Measurement toolbar with common measurement icons that can be dragged and dropped onto the
measurement toolbar
displayed waveforms
FFT
Frequency range
DC to 10 GHz (at 20 GSa/s) or 5 GHz (at 10 GSa/s)
Frequency resolution
Resolution = sample rate/memory depth
Window modes
Hanning, flattop, rectangular , Blackman Harris, Force
2 Requires MATLAB software.
