9
Widest range of debug and compliance software applications: serial physical-layer
USB 2.0 compliance testing (N5416A or Option 029 on new scope purchases)
Quickly determine USB compliance with this USB-IF recognized solution. A setup
wizard guides you through test selection and coniguration.
This application is USB-IF approved and supported on all 2.5 GHz and 4 GHz models.
For more information:
www.agilent.com/find/9000_USB-compliance
DDR1 and LPDDR/DDR2 and LPDDR2/DDR3 compliance testing (U7233A/N5413B/U7231A
or Options 031/032/033 on new scope purchases) or N5459A Opt 001 for all memory
applications
Quickly and easily evaluate and characterize your memory designs. Automated testing based
on JEDEC speciications saves time. The application also includes additional debug and com-
pliance capabilities.
This application is supported on all models. However, the DDR technology you are using may
dictate the minimal bandwidth required for your scope.
For more information:
www.agilent.com/find/9000_DDR
Ethernet and Energy Efficient Ethernet compliance testing (N5392A and N5392B)
Perform a wide range of electrical tests for 10-, 100-, and 1000-Base-T systems. An N5395C
test ixture and N5396A jitter test cable speed compliance testing.
These applications are supported on all 600 MHz and higher bandwidth models.
For more information:
www.agilent.com/find/9000_ethernet
MIPI compliance testing (U7238A or Option 035 on new scope purchased)
Quickly validate your embedded D-Phy data link for CSI and DSI architectures. This software
performs a wide range of tests required for meeting MIPI D-Phy physical layer
requirements.
These applications are is supported on analog channels of all 4 GHz models.
For more information:
www.agilent.com/find/U7238A
Check for USB compliance.
Test DDR memory.
Validate Ethernet compliance.
Check for MIPI compliance.
