+3$¶$3HUIRUPDQFH7HVW
HP 81130A/’31A Performance Test
b. Switch OFF the channel that is not being tested
If you then test the other channel:
c. Switch ON the channel you are testing, and switch OFF the
other channel.
5. Set the DVM HP 3458A to:
Function: DCV
Trigger: TRIG INT
6. Check the HP 81130A high level at the following high level
settings with the low level set to 0.0 V.
The low level may vary within
+
2% of amplitude
+
50 mV
To check the low level change on the [
3DWWHUQ
] page
CH1 to * Low Seg.
7HVW/RZ/HYHO2KPVLQWR2KPV
1. Set up the HP 81130A as described in "Initial Setup of the HP
81130A"
2. On the HP 81130A set up [
3DWWHUQ
] page
High Level
Acceptable Range
TR Entry
3.80 V
1.0 V
0.5 V
0.1 V
3.678 V to 3.922 V
0.93 V to 1.07 V
440 mV to 560 mV
48 mV to 152 mV
5.1 - 1
5.1 - 2
5.1 - 3
5.1 - 4
