3
Safety guidelines
G5581A Microplate Labeler Quick Guide
Safety guidelines
WARNING
Using controls, making adjustments, or performing procedures other than those
specified in the user documentation can expose you to moving-parts hazards and
hazardous voltage. Before using the Bravo Platform, make sure you are aware of the
potential hazards and understand how to avoid being exposed to them.
Ensure that you are trained in the safe operation of the device and that you have read
the Agilent
Automation Solutions Products General Safety Guide
.
Emergency stops
If the Microplate Labeler is integrated in an automation workstation, follow the
emergency-stop protocol for that system.
To stop the Microplate Labeler in an emergency:
1
Unplug the power cord from the Microplate Labeler or set the power switch to off
(
O
).
Make sure that the point at which the detachable power cord is connected to the
Microplate Labeler is clear from clutter and that it is accessible at all times.
Figure
Connection panel: AC power port and power switch
2
Turn off the air supply.
00149
Vcode
power cable