Loading labels and ribbon
10
G5581A Microplate Labeler Quick Guide
Removing the used ribbon
See the following figure for the component locations referenced in the procedure.
To remove the used ribbon:
1
While firmly grasping the ribbon supply hub (
1
), turn the green knob clockwise
to contract the hub and loosen the empty roll. Slide the roll off of the hub.
2
Lift the printhead lever (
2
) counterclockwise to lift the printhead.
3
While firmly grasping the take-up hub (
3
), turn the green take-up knob clockwise
to contract the hub and loosen the used roll of ribbon. Slide the used roll off
of the take-up hub.
4
Lift the remaining ribbon out of the printer.
IMPORTANT
Clean the printhead before loading the new ribbon.
2
1
3