Appendix
Hardware Description
5-4 E2969-91020
Status LEDs
The following table shows the meaning of the LEDs, when they are on:
Number
of LED
Information
0
Link up
1
Link activity
upstream port towards target platform
2
(not used)
3
(not used)
4
Link up
5
Link activity
downstream port towards DUT
6
(not used)
7
FPGA is correctly loaded (LED is flashing)
DIP Switches
The connector on the front plate of the PTC allows connecting the PTC to
an Agilent E2960 protocol analyzer. The analyzer can be used to monitor
the PCI Express traffic at one of the following points:
•
between the target platform and the PTC (at the bottom connector)
•
between the PTC and the add-in card plugged onto the test card (at the
upper connector)
Of the eight DIP switches as shown in the picture above, the two switches
on the left control these settings. All other DIP switches are for internal
use only. Do NOT change their position.
The meaning of these two switches is as follows:
Summary of Contents for E2969A
