RF Switch Specifications 39
Appendix A
Appendix A
RF Switch Specifications
Configuration:
80 signal connections
60 inputs (channel numbers xx0 through xx2)
20 commons (channel numbers COMxx)
One 60:1, two 30:1,... up to 20 3:1 multiplexers
can be configured
3dB Bandwidth:
3:1 Multiplexer:
500 MHz
30:1 Multiplexer:
200 MHz (30:1 specifications apply
for channels 000 - 132 to COM05 or
channels 200 - 332 to COM25
multiplexers)
60:1 Multiplexer:
100 MHz
Terminated Isolation:
10 MHz:
80 dB
100 MHz:
60 dB
200 MHz:
50 dB
500 MHz:
40 dB
VSWR (Voltage Standing Wave Ratio) for a 3:1
Multiplexer:
100 MHz:
1.4
200 MHz:
1.45
500 MHz:
1.7
VSWR (Voltage Standing Wave Ratio) for a 30:1
Multiplexer:
200 MHz:
1.5
(30:1 muxs are channels 000 - 132 to COM05 or
channels 200 - 332 to COM25 multiplexers)
VSWR (Voltage Standing Wave Ratio) for a 60:1
Multiplexer:
100 MHz:
1.5
Characteristic Impedance:
50
Ω
Power Consumption:
+5 Volt power supply, 3.5A (all relays closed)
Relay Ratings:
Maximum RF Power:
10W
Switch Life: no load:
5x10
6
closures
0.01A @ 24 Vdc:
3x10
5
closures
10 Watts RF:
1x10
5
closures
A16 Register-based device:
A16 Register-based Slave-only device as defined in the
VMEbus standard and the VXIbus specification, rev. 1.4.
Power-on/Reset State:
Channel xx0 connected to COMxx. Channel 0 in each 3:1
is connected to its respective common.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
