Agilent Technologies B2200A User Manual Download Page 19 | Manualshive

Page: 19 / 234

background image

Agilent B2200 User’s Guide, Edition 2

1-3

Introduction

Agilent B2200 Series

Agilent B2200 Series

Agilent B2200 series is a switching matrix designed for semiconductor dc
characteristics measurement applications. The Agilent B2200 series has 14 input
ports and four card slots for the switch modules (plug-in cards), and can configure a
12, 24, 36, or 48 outputs switching matrix. The Agilent B2200A/B2201A supports
the following dedicated switch module.

•

Agilent B2210A fA Leakage Switch Module

Dedicated for the Agilent B2200A mainframe.

•

Agilent B2211A 14ch Low Leakage Switch Module

Dedicated for the Agilent B2201A mainframe.

NOTE

Mixed configuration of the switch modules is not supported.

Basic functions of the Agilent B2200 series are listed below.

•

SMU inputs (for source monitor units): 8 ports

•

AUX inputs (multipurpose inputs): 6 ports

•

Outputs: 12, 24, 36, or 48 ports

•

Connection setup and status monitor on the front panel

•

Status display on the LED matrix display

•

Connection setup by the Light pen

•

Automatic control through GPIB interface

•

Auto ground function

•

Self-test, relay function test

•

Relay cleaning

«
...
17
18
19
20
21
...
»

Summary of Contents for B2200A











































































































































































































































Reviews:

No comments

Related manuals for B2200A

Celabs Distribution Hub and Receiver

Brand: Cable Electronics Pages: 2

Brand: Aruba Pages: 6

Brand: SMC Networks Pages: 43

Brand: Electroswitch Pages: 6

Brand: Comm-Tec Pages: 48

Brand: Lightwave Pages: 53

Brand: H3C Pages: 57

Brand: Avid Technology Pages: 34

pro-trim PT1000

Brand: Seastar Solutions Pages: 2

Brand: Inter-m Pages: 12

Nivotester FTC325

Brand: Endress+Hauser Pages: 40

Brand: Eagle Pages: 2

Brand: PCB Piezotronics Pages: 31

Brand: Blackberry Pages: 10

Brand: QNAP Pages: 30

PDI WaveStar BCMS

Brand: Eaton Pages: 54

Brand: Black Box Pages: 2

Brand: Datacom Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands