Italy 250V/10A
CIE
23-16/IEC320
C13
Switzerland 250V/10A
SEV1011/IEC320
C13
User Manual: Agilent Acqiris 3-, 5-, and 8-slot cPCI Crates
A compact disc in an Agilent Technologies paper CD envelope that includes
o
10 product User Manuals in electronic form (8-bit Digitizers, 10-bit Digitizers, 12-bit Digitizers,
Averagers, Analyzers, Signal Analyzers, Streamer Analyzers, Time-to-Digital Converters, 3-, 5-,
and 8-slot CompactPCI Crates, and the 21-slot CompactPCI Crate),
o
1 Programmer’s Guide and 1 Programmer’s Reference Manual,
o
device drivers with sample software for different operating systems, environments and languages,
o
the Analyzer Demo application, a demonstration program for the AC/SC Analyzer products,
o
the AcqirisLive application, a demonstration program for our digitizer and averager products,
o
the SSR Demo application, a demonstration program for the Acqiris AP235/AP240 Analyzers,
o
the APX01 Demo application, a demonstration program for the Acqiris AP101/AP201 Analyzers,
o
the TC Demo application, a demonstration program for the Acqiris TC840/TC842/TC890 Time-to-
Digital Converters,
o
full installation procedures for use with Microsoft Windows, National Instruments LabVIEW RT,
Wind River VxWorks, IVI-COM/C, and Linux software.
For many products a declaration of conformity is still included. However, in an increasing number of cases
the Declaration can be viewed at
.
Optional equipment. See the enclosed packing list.
1.8.
Optional Equipment
1.8.1.
Rack-mount Adapter
The following optional rack-mount kits are available from Acqiris :
U1092A-C31 XC103 RACK-MOUNT ADAPTER
for CC103 crate. Height 3U (132.5mm).
U1092A-C51 XC105 RACK-MOUNT ADAPTER
for CC105 crate. Height 4U (177mm).
U1092A-C81 XC108 RACK-MOUNT ADAPTER
for CC108 crate. Height 5U (221.4mm).
Each adapter allows the mounting of the crate in a standard 19inch (483mm) instrumentation rack, with the adapter
attached to either the front or the rear of the crate.
For further information, refer to the appendix
4.1.
,
4.2.
and
4.3. Rack-mount Adapter
assembly instructions.
1.8.2.
Handles for Rack Mounted
They optional handles are designed for use with the rack-mount adapters. They make it easy to carry the crate and to
mount it in the instrumentation rack. They can be left on the crates permanently since they do not interfere with the
cooling air circulation.
XC114 Handles for Rack Mounted
for CC103 crate equipped with XC103 rack-mount adapter.
XC116 Handles for Rack Mounted
for CC105 crate equipped with XC105 rack-mount adapter.
XC119 Handles for Rack Mounted
for CC108 crate equipped with XC108 rack-mount adapter.
For further information, refer to the appendix
4.4.
HANDLES FOR RACK MOUNTED CC10X CRATE FAMILY
assembly instructions
.
1.8.3.
Carrying Handle and Feet
When these optional handle and feet assemblies are installed it is safe and easy to carry the crates and to stand them
on their sides. They can be left on the crates permanently since they do not interfere with the cooling air circulation.
WARNING
,
the CC10X family crates have not been designed to function when they are standing on their sides,
users must accept the responsibility for using in that position.
User Manual: Agilent Acqiris 3-, 5-, and 8-slot cPCI Crates
Page 6 of 28