manualshive.com logo in svg

Agilent Technologies 8960, Reference Manual

Share
Download
Agilent Technologies 8960 Reference Manual Download Page 330

330

 S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_opq.fm

CALL:MS:REPorted:<ONUM, OPER,PCL,PCON,PNUM,PREV,QPCH>

CALL:MS:REPorted:ONUMber?

CALL:MS:REPorted:OPERating:MODE?

CALL:MS:REPorted:PCLass[:SELected]?

Function

Queries the phone number the mobile station dialed in a mobile originated call. Used only in 
active cell mode. Returns a string of up to 16 digits.

Query

Range: up to 16 digits: 0 through 9, *,#, or null

*RST Setting

null

Programming Example

OUTPUT 714;”CALL:MS:REPORTED:ONUMBER?” !Returns the phone number the mobile dialed.

Function

This query returns up to three concatenated mobile station reported operating modes. 

Each operating mode that is included in the returned string is right-justified within an 
8-character slot. Each 8-character slot is followed by a comma and a space until the last band is 
sent. The last band in the string will not have an appended comma and a space. 

Each operating mode that is included in the returned string will correspond, by its position in the 
string, with the position of each band class in the string returned by the command 

“CALL:MS:REPorted:BCLass?” 

.

Each time a new mobile station registers with the test set, the test set will have the mobile 
station report band classes, mobile station reported operating mode for each band class, and 
mobile station reported max EIRP ( if the operating mode is CDMA) for each band class. These 
results are referred to as Status Request Information.

Query

Range: DualMode|CDMA|Analog|N-Analog|W-Analog|Null

*RST Setting

Null

Programming Example

OUTPUT 714;"CALL:MS:REPORTED:OPER:MODE? !when sent to a mobile station supporting US cellular and 

US PCS bands, might return something similar to the following string: 

“<sp><sp>Analog,<sp><sp><sp><sp><sp>CDMA". 

Note that this string consists of 16 characters (8 for each band) plus a comma and space separating 

the two operating mode. 

Function

Queries the mobile reported power class as part of the station class mark (SCM) for the active 
(that is the selected) radio format. 

Used only in active cell operating mode.

Query

Range: 1 through 8, 9.91 E+37

*RST Setting

9.91 E+37

Programming Example

OUTPUT 714;"CALL:MS:REPORTED:PCLASS:SELECTED?" !Returns the MS reported power class.

Summary of Contents for 8960



















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands