Agilent Technologies 85054D, User'S And Service Manual

Page: 46 / 53

6-2 85054D
Replaceable Parts
Introduction
Introduction
Table 6-1 lists the replacement part numbers for items included in the 85054D calibration
kit and Figure 6-1 illustrates each of these items.
Table 6-2 lists the replacement part numbers for items recommended or required for
successful operation but not included in the calibration kit.
To order a listed part, note the description, the part number, and the quantity desired.
Refer to
“Contacting Agilent” on page 5-5 .
Table 6-1 Replaceable Parts for the 85054D Calibration Kit
a
a. Refer to “Clarifying the Terminology of a Connector Interface” on page 1-8 .
Description Qty Per Kit Agilent Part Number
Calibration Devices (50
Ω
Type-N)
Type-N -m- broadband load 1 85054-60046
Type-N -f- broadband load 1 85054-60047
Type-N -m- offset short 1 85054-60025
Type-N -f- offset short 1 85054-60026
Type-N -m- offset open 1 85054-60027
Type-N -f- offset open 1 85054-60028
Adapters
Type-N -m- to Type-N -m- 1 85054-60038
Type-N -f- to Type-N -f- 1 85054-60037
Type-N -f- to 7 mm
2 85054-60031
Type-N -m- to 7 mm 2 85054-60032
Wrenches
3/4 in., 135 N-cm (12 in-lb) Torque
1 8710-1766
Spanner
1 08513-20014
Miscellaneous Items
Storage case assembly
1 5180-8419
User’s and service guide 1
85054-90050
b
b. Refer to See “Printing Copies of Documentation from the Web” on page ii.
Protective End Cap -f- as required 1401-0225
Protective End Cap (m & 7 mm) as required 1401-0208