Agilent Technologies 81200, Installation Manual

Page: 11 / 76

Getting Started
Steps to Get Started
11
• a number of Agilent E4841A or E4861A Data Generator & Analyzer Modules equipped with the
ordered front-ends.
• the Agilent E4873A Agilent 81200 User Software on CD-ROM
To install modules and User Software into a new or existing test system, see “Setting up an Open
VXI System” on page 37
Additional Information
On-line Help
As soon as the Agilent 81200 User Software is installed, you can access on-line help via the HELP
buttons or by pressing F1.
On-line Documentation
Via the on-line help system you can also launch several guides stored on your system. These guides
are displayed using the Acrobat Reader also coming with this system. You can print the whole guide
or just the required part using the Acrobat Reader’s printing features:
• The User Guide provides a system introduction and how to use the features and functions.
• The Programming Reference gives an programming overview and a complete reference to SCPI
commands for remote control of the instrument.
• The System Specification summarizes the specification for all components available for the
Agilent 81200 System.
To verify the warranted performance of this system a Performance Verification Procedure is provide
at:
drive:\hp81200\Dsr\Doc\perf_ver.pdf
Use the Acrobat Reader installed on your system to open and view this file.
If you are not familiar in using and configuring VXI systems and you would like to learn how to get
started with VXI, we recommend to download the newest version of the “Getting Started with VXI
Guide” from the Web available at:
www.tm.Agilent.com/
World Wide Web
For latest information, frequently asked questions and related documentation, please check the
following URL:
www.tm.Agilent.com/