Agilent Technologies 6050A, Operating Manual

Page: 5 / 98

5
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturer’s Address: New Jersey Division
150 Green Pond Road
Rockaway, NJ 07866 U.S.A.
declares that the product
Product Name: Load mainframe and modules
Model Number(s): Agilent 6050A, 6051A mainframes with modules
Agilent 60501A/B, 60502A/B, 60503A/B, 60504A/B, 60507A/B
conform(s) to the following Product Specifications:
Safety: IEC 348:1978 / HD401 S1:1981
1
EMC: CISPR 11:1990 / EN 55011:1991 Group 1, Class B
IEC 801-2:1991 / EN 50082-1:1992 4kV CD, 8 kV AD
IEC 801-3:1984 / EN 50082-1:1992 3 V/m
IEC 801-4:1988 / EN 50082-1:1992 0.5 kV Sig. Lines, 1 kV Power Lines
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC and carries the CE-marking accordingly.
Note 1: The product family was introduced prior to 12/93
--------------------------------------------------------
New Jersey, January 1997 Bruce Krueger / Quality Manager
European Contact: Your local Agilent Technologies Sales and Service Office or Agilent Technologies GmbH,
Department TRE, Herrenberger Strasse 130, D-71034 Boeblingen (FAX:+49-7031-14-3143)
Printing History
The current edition of this guide is indicated below. Reprints of this guide containing minor corrections and updates may
have the same printing date. New editions are identified by a new printing date and, in some cases, by a new part number.
A new edition incorporates all new or corrected material since the previous edition. Changes to the guide occurring
between editions are covered by change sheets shipped with the guide. Also, if the serial number prefix of your power
module is higher than those listed on the title page of this guide, then it may or may not include a change sheet. That is
because even though the higher serial prefix indicates a design change, that change may not affect the content of the guide.
Edition 3 May, 1993

Copyright 1993 Agilent Technologies, Inc.
..................... October, 1997
Update ......... April, 2000
This document contains proprietary information protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior consent of Agilent Technologies The
information contained in this document is subject to change without notice.