manualshive.com logo in svg

Agilent Technologies 5500a, Operation Manual

Share
Download
Agilent Technologies 5500a Operation Manual Download Page 9

Getting Started 

Agilent 5500 Series FTIR Operation Manual 

9 

 

2.

 

Getting Started 

Unpacking 9 
Connecting power 

11 

Connecting the computer 

14 

Turning on the instrument 

15 

Starting the software 

16 

Performance verification 17 

Unpacking 

To unpack your spectrometer system: 

1

 

After receiving the Agilent 5500 Series FTIR delivery, do not 
immediately open the shipping container. Instead, place the 
shipment in a room-temperature environment and allow several 
hours for the contents of the container to reach the room 
ambient temperature. This is to avoid unnecessary condensation 
on the components prior to the initial setup and installation 
process.  

2

 

The shipping enclosure should contain the items listed below. 
Inspect the enclosure closely to make sure all items have been 
removed from the shipment packaging. Also ensure that all the 
items in the packing list below have arrived undamaged and are 
in good working condition. Contact Agilent immediately if any 
items are found to be missing in shipment or damaged.  

NOTE 

Keep all original packing material for storing, shipping and transporting the 
system in the future. 

 

Summary of Contents for 5500a























































Reviews:

No comments

Brands by name

Popular brands

Load more brands