Getting Started
16
Agilent 5500 Series FTIR Operation Manual
Starting the software
To start the software:
1
Ensure that the system is active, then double-click the
MicroLab
PC
icon.
2
The system must have a warmup period of 5 minutes, before
analysis may begin.
Logging on to MicroLab PC for the first time
The 5500 Series FTIR systems are supplied with the Agilent MicroLab
PC software, which has already been installed on your external
laptop computer.
In addition, the system is provided with a shortcut to the MicroLab
PC software in the Start menu.
Upon initial power up of the spectrometer system, the MicroLab PC
software application splash screen briefly appears, showing the
version, copyright and trademark information. The software will
launch and display a logon screen.
When the logon screen appears, the user name will be ‘Admin’ –
when logging onto the system for the first time, the software
automatically initiates in an Administrator mode. The default
password for initial logon to MicroLab PC software is ‘admin’.
NOTE
The user name and password are case-sensitive.
For detailed instructions on initial software logon and user
management, refer to the MicroLab Software Operation Manual.
For additional instructions on adding a user to the system and other
initial software setup procedures, plus editing methods and
reviewing data using MicroLab PC software, refer to the MicroLab
Software Operation Manual.
Summary of Contents for 5500a
Page 1: ...Agilent 5500 Series FTIR Operation Manual ...
Page 53: ......
