Agilent Technologies 3200D, Operating Manual

Page: 35 / 116

Operation 2

3200D Dissolved Oxygen Meter Operating Guide 35
To set the salinity value (SALI Value)
You do not usually need to set salinity. The default salinity value
is 0.0 g/L.
1 From the initial state, press [ Setup ]. The setup screen
appears. See Figure 12 on page 26.
2 Use the directional arrow keys to navigate to SALI Value .
3 Press [ Enter ] to select SALI Value or press [ Cancel ] to exit.
The SALI Value screen appears on the display. Enter the salinity
pressure.
Auto power off
The meter can power off automatically after a set time period.
To set the
Auto Power Off time:
1 From the initial state, press [ Setup ]. The setup screen
appears. See Figure 12 on page 26.
2 Use the directional arrow keys to navigate to Auto Power Off .
3 Press [ Enter ] to select Auto Power Off or press [ Cancel ] to exit.
4 The Auto Power Off screen appears on the display. Enter a
power down time from 10 to 480 minutes. Enter a time of 0 to
disable
Auto Power Off .
5 Press [ Enter ].
When the
Auto Power Off
time elapses after the start of a
measurement, the meter shuts down. If the meter is connected
to the Electrochemical Data Collecting Software,
Auto Power Off
is disabled.
Figure 19 Set salinity value