Agilent Technologies 3200D, Operating Manual

Page: 30 / 116

30 3200D Dissolved Oxygen Meter Operating Guide
2 Operation


Set Condition
Use Set Condition to specify Auto-Lock parameters when
measuring in the Auto-Lock measuring mode. An Auto-Lock
measurement ends when all measured parameters meet the
conditions set on this screen. For example, if the condition of
DO is set to 1.0%, when the measured DO holds stable within a
1.0% tolerance for the set Auto-Lock time interval, the
measurement ends and the screen locks displaying the final
reading.
To set the conditions:
1
From the initial state, press [
Setup
]. The setup screen
appears. See Figure 12 on page 26.
2
Use the directional arrow keys to navigate to
Set Condition
.
3 Press [ Enter ] to select Set Condition or press [ Cancel ] to exit.
4
The
Set Condition
screen appears on the display. See Figure 15 .
5
Use the arrow keys to select a condition to edit. Press [
Setup
]
to edit the value.
6
Enter the desired value. The Auto-Lock time has a range of
1–200 seconds.
7
Press
[Enter]
to save the new setup, exit, and return to the
initial state. Press
[Cancel]
to exit without saving changes.
Figure 15 Setting a condition