Agilent Technologies 3000 Series, User'S And Service Manual, Page: 99 / 156

Making Measurements 4
Agilent 3000 Series Oscilloscopes User’s Guide 99
5 To adjust the cursors:
• Select CurA and turn the Entry knob to adjust the “A” cursor.
• Select CurB and turn the Entry knob to adjust the “B” cursor.
The cursor values displayed are:
• CurA.
• CurB.
• DeltaX or DeltaY — difference between CurA and CurB values.
• 1/DeltaX — when measuring time parameters, shows the frequency
associated with the time period.
To use tracking cross-hair cursors
You can set up one or two manually adjustable, tracking cross- hair cursors
to make amplitude (vertical) and time (horizontal) measurements at
different points of a selected channel’s waveform.
1
Press
Cursors
.
2
In the Cursors menu, press
Mode
until “Track” is selected.
3
Press
Cursor A
to select the channel on which to make the measurement
(or “None” to turn off the cursor).
4 Press Cursor B to select the channel on which to make the measurement
(or “None” to turn off the cursor).
5
To adjust the cursors:
• Select
CurA
and turn the
Entry
knob to adjust the “A” cursor.
• Select
CurB
and turn the
Entry
knob to adjust the “B” cursor.
The A cursor values displayed are:
• A- >X.
• A- >Y.
The B cursor values displayed are:
• B- >X.
• B- >Y.