Agilent Technologies 11713B, Operating And Service Manual, Page: 81 / 114

Remote Interface Configurations
7
11713B/C Operating and Service Manual 81
Now you can use the 11713B/C Web Browser Interface to access and
control the instrument. See
“Exploring the 11713B/C Web Interface
Over LAN" on page 85.
If you plan to program the instrument over LAN or use such
programs, make sure you have installed the required I/O software on
your computer.
Use the Connectivity Expert utility of the Agilent IO Libraries Suite
to add the 11713B/C and verify a connection. When identifying the
instrument, it is easiest if you use the IP address noted in step 3
above.
Now you can use various programming environments to control the
11713B/C. For an overview on programming instructions via USB,
refer to the
Connectivity Guide .
3 Verify LAN
status on
11713B/C a At IO SETUP screen,
select
IP ADDR
softkey
b At IP ADDRESS
screen, select
LAN
STAT softkey
c Verify values
CURRENT IP
ADDRESS, CURRENT
SUBNET and
CURRENT GATEWAY
are valid
d Ensure LAN STATUS
is
NORMAL
e If LAN STATUS is
FAULT, check your
LAN connection and
then press
Restart
Netw softkey and wait
f Press BACK softkey to
go back to IP
ADDRESS screen
Step Action Illustration
N O T E
If you have installed any other I/O software, refer to documentation included with
that software.