Agilent Technologies 11713B, Operating And Service Manual, Page: 48 / 114

48 11713B/C Operating and Service Manual
4
Verification
Operator’s Check for Remote Operation
These procedure verify that the driver can be controlled remotely
using GPIB, USB and/or LAN.
1
Refer to Chapter 7 , “Remote Interface Configurations, to connect
11713B/C to your computer through GPIB, USB and/or LAN.
2 Once remote connection is available, send the following SCPI
commands to the driver and note the changes on front panel
LEDs.
If the above checks are successful, the driver’s remote operation is
working correctly. These procedures do not check all of the drivers’s
program codes that can be executed. However, if the driver work
correctly from the front panel, there is a high probability that the
driver will respond to all the program codes.
Description Command Observation
Close switching paths from
channel 1 to channel 4 (bank1) ROUTe:CLOSe (@101:104) LEDs for pushbuttons 1 to
4 light ON
Open switching paths from
channel 5 to channel 8 (bank 1) ROUTe:OPEn (@105:108) LEDs for pushbuttons 5 to
8 light OFF
Query status on channel 2 (bank
1) ROUTe:CLOSe? (@102) Return value “1” (LED for
pushbutton 2 light ON)
Query status on channel 7 (bank
1) ROUTe:CLOSe? (@107) Return value “0” (LED for
pushbutton 7 light OFF)