Agilent Technologies 1000 Series User Manual Download Page 74

Page: 74 / 154

Capturing Data

Agilent 1000B Series Oscilloscopes User’s Guide

Use the equivalent- time sampling mode to capture repetitive
high- frequency signals at greater sample rates than are available in the
real- time sampling mode.

Do not use the equivalent- time mode for single- shot events or pulse
waveforms.

The benefits of the equivalent- time sampling mode are negligible when
sample rates are the same as available in the real- time sampling mode.

In the 1000B Series oscilloscopes, the equivalent time sampling mode can
achieve up to 40 ps of horizontal resolution (equivalent to 25 GSa/s).

To select the Equivalent- Time sampling mode:

Press

[Acquire]

In the Acquire menu, select

Sampling

to choose the “Equ- Time” sampling

mode.

Summary of Contents for 1000 Series



























































































































































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Agilent Technologies 1000 Series, User Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands