User manual version 1
AV dsp amp
Applications
With one module the following applications can be set up, further explained in
the
“
Hardware part chapter :
”
•
Stereo passive filtered system
•
Briged mode for single subwoofer (max 140Watt into 4 Ohms)
•
Mono/mid 2-way setup (t sub)
When two modules are used the following applications can be set up, also
explained in
“
Hardware part :
”
•
2-way active filtered stereo system
•
2 channel system with active subwoofer
•
2 channel system, both modules in bridge mode for more power
All setups are both possible with analogue and optional with the digital audio
inputs SPDIF and USB.
Note that all setups have the ability to use an extra channel by connecting a
active subwoofer to the subout. By this you will have the opportunity to build a
3-way system.
Connections
Figure 1
Overview of the connections on the front of the AV dsp amp.
Function
1
Amplifier output, for slave speaker in stereo setup
4
Analogue input left channel
5
Analogue input right channel
6
Subwoofer output
- 4 -
Summary of Contents for AV dsp amp
Page 1: ...User Manual AV dsp amp...
