User manual version 1
AV dsp amp
Figure 11
Examples
Example 1: 2-channel stereo setup
This example will guide you through setting up you 2-channel stereo system with
the AV dsp amp, picture of this kind of setup is given in Figure 4. The master
module is always the one with the control panel connected.
First you got your 2 modules with no cables or speakers connected!.
Master
1. Plug- in the power connector and switch the module to ON
2. Power up the module by the control panel or remote
3. Start the pc program, filter design
4. Plug-in the USB cable (assumed that you’ve already installed the
software as described in chapter
“
Software installation )
”
5. Wait for automatic connection, a popup is displayed as in Figure 6. If
connection is not automatic the press the connect button. If there is
“
”
no response there is a problem with the USB connection or your operating
system that can not detect the USB device
- 18 -
Summary of Contents for AV dsp amp
Page 1: ...User Manual AV dsp amp...
