AGILE ALLY PLUS 6287, User Manual

Page: 54 / 186

6287 ALLY PLUS User’s Manual Page 3-14
27 — DSC EM generates CR/LF even if in column 1
If a DSC EM is detected, and if the printhead is in the leftmost column,
normally the ALLY PLUS will not send out a new line sequence (CR/LF).
This option allows the user to force the ALLY PLUS to send out the new
line sequence no matter what column the print head is in. To force a new
line, set this option to 01. The default value is 00. Refer to Section 8 —
DSC Data Streams for more information. Use the following sequences to
program this option:
!ALLY!27=00; if EM and in column 1, NL not sent (default)
!ALLY!27=01; if EM and in column 1, NL is sent