manualshive.com logo in svg

AGILE ALLY PLUS 6287, User Manual

Share
Download
AGILE ALLY PLUS 6287 User Manual Download Page 135

Page 11-9

6287 ULTRA COMPATIBILITY

37 — Reserved

This option is reserved in the current ULTRA firmware, and it has no

equivalent in the ALLY PLUS.

38 — Reserved

This option is reserved in the current ULTRA firmware, and it has no

equivalent in the ALLY PLUS.

39 — Non-Transparency Trigger 1 Output

This command has no effect in the ALLY PLUS.

40 — Alternate Host Lockout Duration

The setting of this option will determine the settings of all four potential

alternate host ports on the ALLY PLUS (Options 80, 81, 82 and 83). The

ULTRA decimal value is executed as though it were the equivalent ALLY

PLUS hexadecimal value. The General Configuration Report will display

the hexadecimal value.

41 — Serial Alternate Host CTS Enabled

The setting of this option will affect the settings of both ALLY PLUS

Options 45 and 4B. A value of “Y” is executed as though it were an ALLY

PLUS value of 02, and a value of “N” is executed as an ALLY PLUS value

of 01. The General Configuration Report will display either “1=XON/

XOFF” or “2=RTS/CTS.”

42 — Reserved

This option is reserved in the current ULTRA firmware, and it has no

equivalent in the ALLY PLUS.

43 — Reserved

This option is reserved in the current ULTRA firmware, and it has no

equivalent in the ALLY PLUS.

44 — Reserved

This option is reserved in the current ULTRA firmware, and it has no

equivalent in the ALLY PLUS.

Summary of Contents for ALLY PLUS 6287



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands