50
8210–00011 R1
creating a buildup. Consider replacing the conveyor belt if it is in poor condition. If equipped with an electric
motor, inspect on the belt return side with the electric motor not running. Turn on the conveyor to expose
the belt that was previously in the tube. Turn off the conveyor and inspect the belt on the belt return, along
with the lacing.
3. Shutdown and lockout power to the conveyor and vacuum or sweep out any remaining fertilizer from the
hopper.
4. Remove the s-drive bottom cover and remove any buildup from this area and clean cover. Replace the cover
when complete.
5. If buildup is evident on or under the belt, remove the buildup to ensure proper operation of the conveyor.
When necessary remove fertilizer buildup from under the belt by scraping and washing the belt.
Figure 20.
Fertilizer Buildup on Rollers
Figure 21.
Fertilizer Buildup at Hopper Transition
SWING-AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
