7
DECT 50
Using the DECT 50 for the first time
Insert the rechargeable battery into the handset (see above).
Connect the enclosed power supply unit to the charging cradle and plug the power supply into
the mains socket.
Remove the protection film from the display and insert the handset into the charging cradle to
charge the batteries.
The charging symbol will be shown in the display to indicate that the DECT 50 is now being
charged. Once the batteries are completely charged the charging symbol will change to green.
Now continue to register the DECT 50 (refer to page 8).
Insert Battery
To open the battery compartment, press the cover with your thumb and slide this towards the
charging contacts, then lift the cover upwards.
Insert the battery in such a way that the contacts of the battery touch the spring contacts of
the handset.
To refit the cover follow the steps of opening in reverse order.
Approved Rechargeable Batteries:
Only the enclosed battery is approved for use with this handset.
Do not use any other battery.
