AGFA StudioScan II, Owner'S Manual

Page: 39 / 44

27
Caring for your scanner
This chapter covers general maintenance tips for your StudioScan II.
Cleaning the scanner
Cleaning the glass plate regularly will ensure that dirt or smudges do
not reduce the quality of your scanned images.
Before cleaning, turn off the power to the scanner and unplug the
cord.
Use a damp cloth and a mild detergent to clean the surface of the
glass plate and document board. If you use alcohol to clean the glass
plate, make sure you do not touch the plastic elements of the scanner.
❖
Warning: Avoid using sprays directly onto the glass plate as this may
cause the liquid to penetrate the seams around the glass and contaminate
the mirrors and lenses inside the scanner.
Replacing the fluorescent lamps
The StudioScan II and Transparency Module lamps each have an
average lifetime of 3000 hours. Lamp replacement must only be
carried out by an authorized Agfa dealer. Return the scanner in its
original packing to your dealer for service.
❖
Warning: Do not open the scanner housing. There are extremely sensitive
components inside the scanner.
Replacing the fuse
Fuse replacement must only be carried out by an authorized Agfa
dealer. Return the scanner in its original packing to your dealer for
service.
❖
Warning: Do not open the scanner housing. There are extremely sensitive
components inside the scanner.
Cleaning the scanner