xii
■
Chapter 2, ‘Installation’, shows you how to set up your StudioScan
II and how to set the SCSI ID number.
■
Chapter 3, ‘Using the scanner’, tells you how to place different
originals.
■
Chapter 4, ‘Caring for your scanner’, covers general maintenance
tips for your scanner.
■
Appendix A, ‘Troubleshooting’, can be helpful when you come
across problems that you are unable to solve.
■
Appendix B, ‘Technical information’, provides specifications and
lists additional accessories available for your StudioScan II.
About the FotoLook documentation
Besides this Owner’s Guide, your StudioScan II comes with a
documentation set for FotoLook. In this documentation you can find
information on how to install and use the FotoLook software.
Conventions
The following conventions are used in this guide:
❖
Note: A note of this type gives you additional information.
■
Instructions are preceded by a small red square and are set in
bold.
1. Numbered steps describe the actions you must take to perform
a task.
Introduction
Summary of Contents for StudioScan II
