AGFA DR 10s User Manual Download Page 74

Page: 74 / 112

Positioning the DR Detector

When performing an exposure, keep in mind the following detector

orientation aids:

• tube side
• patient orientation marker

Figure 17: Detector orientation aids

Location blue patient orientation marker

Tube side of the detector

The detector orientation and the patient orientation are exposure settings on

the NX workstation. The detector orientation is displayed on the NX

workstation as cassette orientation.
The user is responsible for the correct and clear marking on the left or right

side of the image to eliminate possible errors.

Table 2: Table with bucky

Table with bucky, portrait

Table with bucky, landscape

Note

NX is configured for a specific patient orientation, either

head left (default) or head right.

| DR 10s | Getting started

0351A EN 20190319 1349 *

Summary of Contents for DR 10s

















































































































Search results

Summary of Contents for DR 10s

Reviews:

Brands by name

Popular brands

AGFA DR 10s, User Manual

Search results

Summary of Contents for DR 10s

Reviews:

Brands by name

Popular brands