AGFA DR 10s User Manual Download

Page: 32 / 112

Related Links

Remarks for HF-emission and immunity

on page 103

Topics:

•

Local regulations

•

Restrictions on outdoor use

Local regulations

This product complies with local radio frequency regulations in the country or

region where you purchased the product. Note that it cannot be used in any

areas other than the country or region of its purchase.
The radio frequency channel (5 GHz) configured for indoor use may not be

usable in outdoor areas, depending on local radio frequency regulations.
If you would like to add other equipment to the environment where this

product is installed, or to use this product in other environments, please

consult your sales representative or local dealer for details.

Restrictions on outdoor use

There are restrictions on the outdoor use of the U-NII Low (5150-5250 MHz)

and U-NII Mid (5250-5350 MHz) bandwidths of the WLAN module

incorporated in the device in the following Member States: Belgium (BE),

Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia

(EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy

(IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary

(HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal

(PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE)

and United Kingdom (UK).

| DR 10s | Introduction to the DR Detector

0351A EN 20190319 1349 *

Summary of Contents for DR 10s

















































































































Search results

Summary of Contents for DR 10s

Reviews:

Related manuals for DR 10s

Brands by name

Popular brands

AGFA DR 10s, User Manual

Search results

Summary of Contents for DR 10s

Reviews:

Related manuals for DR 10s

Brands by name

Popular brands