AGFA ADC Solo, User Manual

Page: 53 / 70

53
2301D EN 20040224
CASSETTE NOT
IDENTIFIED Press , remove
and identify
• Press Confirm key.
• Remove cassette.
• Identify cassette.
• Re-insert cassette.
24 X 30 CM
CALIBRATION
MISSING
Press to accept
or
• Press Confirm key to treat
24 x 30 cm image plate with-
out calibration or press Can-
cel key to treat cassettes with
other formats.
• Contact your local service
organization.
SERVICE MODE Please wait Wait.
CASSETTE SLOT
BLOCKED Remove cassette,
press
• Remove cassette.
• Remove obstructing objects.
• Press Confirm key.
IMAGE-QUEUE FULL Check queue
• Refer to ‘Consulting the
image transmission queue
(‘Queue management’)’
on
page 48 of the Reference
manual.
• Check that the ADC Solo is
not off line (Refer to ‘The dis-
play’ on page 15 ).
UNKNOWN
DESTINATION
[PPNAME]
Press , remove
cassette and identify
• Press Confirm key.
• Remove cassette.
• Identify cassette.
• Re-insert cassette.
• Check the configuration of
the system.
RIGHT SIDE PANEL
NOT CLOSED Close right side
panel
Close the right side panel.
UNKNOWN IP-TYPE
Press , remove
cassette, call
Service.
• Press Confirm key.
• Remove cassette.
• Contact your local service
organization.
EMERGENCY DATA
NOT DEFINED Emergency keys
disabled, press
• Press Confirm key
• Contact your local service
organization.
Status field: LOCKED
MESSAGE 1 Message 2 Action