AGFA ADC Solo, User Manual, Page: 26 / 70

26
2301D EN 20040224
3 Insert the cassette containing the image plate into the cassette slot of the ADC
Solo as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking mecha-
nism [2] at the bottom.
While treating the image plate, the ADC Solo will display the following screen:
The ADC Solo:
• reads the cassette identification data;
• converts the information of the latent image to digital data;
• if fast preview is enabled, transmits the digital image data in blocks of typical 100
lines to the preview station;
• erases the image plate and re-inserts it into the cassette;
• gives the cassette ID data the status ‘erased’;
• returns the cassette;
• transmits the digital image data to the image processing station (‘destination’).
When the ADC Solo has treated the cassette, it displays the operator main screen.
❖
If the ADC Solo displays an error message, refer to ‘Troubleshooting check-
list’ on page 50 .
MUSICA
2
1
BUSY
Miller Chest AP
ADC SOLO