manualshive.com logo in svg

AGFA 5540/100, User Manual

Share
Download
AGFA 5540/100 User Manual Download Page 130

Stop positions

The system includes stop positions for manual movement of the X-ray tube

head.
The preferred positions of the stops are defined during installation.
The stop positions are used to position the system manually for typical

radiographic examinations, e.g. a SID of 180 cm for chest examinations.
Stop positions are different for radiographic table and radiographic wall

stand. Which stop positions are active depends on the orientation of the X-ray

tube.
To enter a stop position, move the X-ray tube head unit using the control

buttons. The movement is stopped when a stop position is reached. Move at a

regular speed to prevent the X-ray tube head unit to skip the stop position.
To leave a stop position, release and press again the according movement

control button.

130

 |  Valory (system with floor mounted column) | Positioning the X-Ray Tube

0426A EN 20220804 1858

Summary of Contents for 5540/100




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands