AGFA 5364/500 User Manual Download Page 65

Page: 65 / 165

The

progress indicator

keeps the user informed of the progress of a process

(e.g., calculation of a bitmap, printing of a film, copying files). The line is

gradually filled from left to right, from 0% to 100% as the process proceeds.

Note

On the print queue screen the modality name defined

during installation (nickname) will be used to refer to the

corresponding modality. In case no nickname has been defined

during installation, the AE-title will be used.

Related Links

Managing the print queue

on page 71

Key-operator mode

, operation is menu driven. The menu displays the

Keyoperator functions and the active keys.

Key-operator main menu functions

Active keys

DRY 3.4 | Introduction |

2602A EN 20191018 0826

Summary of Contents for 5364/500






































































































































































Search results

Summary of Contents for 5364/500

Reviews:

Related manuals for 5364/500

Brands by name

Popular brands

AGFA 5364/500, User Manual

Search results

Summary of Contents for 5364/500

Reviews:

Related manuals for 5364/500

Brands by name

Popular brands