9
STEP 3 – CALIBRATE
The third and final stage in the
set-up is
‘Calibration’. Check
the selected zone-area, ensure
the zone is empty, then click
‘On-Site Calibration’.
Successful completion of
the calibration will result in
the detector returning to the
‘
Home’ page.
HOME PAGE
Following successful
calibration you will view
your selected zone actively
‘detecting’ on the ‘Home Page’
- and helpfully, if the detector
has been previously setup you
will come straight to the Home
Page on connection.
The image you see on the
screen will be the detect area
with any area excluded
greyed out. This image will
update periodically.
Monitor the zone and check the
detector triggers - the front LED
will illuminate and extinguish
when someone enters and
leaves the zone.
A box around the image will
illuminate
RED on Detection.
Installation and Commissioning
