AGD 641-300-021 Product Manual Download Page 20

20

While we (AGD Systems) endeavour to keep the information in this manual correct at the time of download 
or print, we make no representations or warranties of any kind, express or implied, about the completeness, 
accuracy, reliability, suitability or availability with respect to the information, products, services, or related 
graphics contained herein for any purpose. 

Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable 
for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or 
damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this 
manual.

WARRANTY

All AGD products are covered by a 12 month return to factory warranty. Products falling outside this period may 
be returned to AGD Systems for: evaluation, repair, update or re-calibration, any of which may be chargeable. 

© A

GD Syst

ems Limit

ed 2019 Doc. R

ef 641 PM IS

S1

traffic.group

AGD Systems Limited   White Lion House, Gloucester Road, Cheltenham, GL51 0TF, UK 
Tel: +44 (0) 1452 854212    Email: [email protected]    Web: agd-systems.com

Disclaimer

Summary of Contents for 641-300-021





















Reviews: