AGD 641-300-021 Product Manual Download Page 15

15

AGD 

641

PEDESTRIAN DETECTOR

AGD 

641

PEDESTRIAN DETECTOR

Important

SAFETY PRECAUTIONS

All work must be performed in accordance with company working practices, in-line with adequate risk 
assessments. Only skilled and instructed persons should carry out work with the product. Experience and safety 
procedures in the following areas may be relevant:

 

•  Working with mains power 

 

•  Working with modern electronic/electrical equipment 

 

•  Working at height 

 

•  Working at the roadside or highways 

1.   This product is compliant to the Restriction of Hazardous Substances (RoHS - European Union directive 

2011/65/EU). 

2.   The product must be correctly connected to the specified power supply. All connections must be made 

whilst the power supply is off or suitably isolated. Safety must take always take precedence and power 
must only be applied when deemed safe to do so. 

3.   No user-maintainable parts are contained within the product. Removing or opening the outer casing is 

deemed dangerous and will void all warranties. 

4.   Under no circumstances should a product suspected of damage be powered on. Internal damage may be 

suggested by unusual behaviour, an unusual odour or damage to the outer casing. Please contact AGD for 
further advice. 

5.   This Product is Compliant with the European Radio Equipment Directive 2014/53/EU. 

There is no  restrictions of use within any EU Member state for this product. 
This product is Receiver Category 2.

Summary of Contents for 641-300-021





















Reviews: