manualshive.com logo in svg

AGCO HayBoss G2 596, Operation Manual

Share
Download
AGCO HayBoss G2 596 Operation Manual Download Page 31

 
 
For AGCO part cross-reference visit: www.harvesttec.com/system.html 

 

31 

Wiring Diagrams 
 

 

A.  Main power connector mounted on battery 

Pin 1 

Red 

+ 12 V input from tractor supply 

Pin 2 

Black 

Ground from tractor supply 

Pin 3 

Orange 

Keyed power 

 

 

 

 

 

B.  Main power connector mounted on PIP 

Pin 1 

Red 

+ 12 V input from tractor supply 

Pin 2 

Black 

Ground from tractor supply 

Pin 3 

Orange 

Keyed power 

 

 

 

 

 

 

 

 

 

C. Pump connection colors 

Pin 1 

Black with orange markings 

Pump 1 ground 

Pin 2 

Black with green markings 

Pump 2 ground 

Pin 3 

Black with yellow markings 

Pump 3 ground 

Pin 4 

Not used 

 

Pin 5 

Orange with black markings 

Pump 1 positive 

Pin 6 

Green with black markings 

Pump 2 positive 

Pin 7 

Yellow with black markings 

Pump 3 positive 

 

 

 

 

 

D. Flow meter connection on Pump Controller 

Pin 1 

White 

5 - 12 V (+) supply  

Pin 2 

Green 

Ground 

Pin 3   Brown 

Signal 

Pin 4 

Black 

Shield 

 

 

 

 

                                                                                                              

E. Connector for Hay Indicator option on PIP 

 

Note: Hay indicators are an option that will turn the system on and off 
automatically as hay enters the pickup of the baler. 

Pin 1 

Red   

+12V 

Pin 2 

Black 

Ground 

Pin 3 

White 

Signal wire 

Pin 4 

Not used 

 

 

 

 

 

Summary of Contents for HayBoss G2 596

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands