AGCO 3300 Command, Settings Manual

Page: 8 / 64

© 2014 AGCO Corporation
Electrical Harness Connection

Rigid Mode Operation
– The potentiometer is attached
to a drag rod that hangs down
on each end of the header. If
the drag rod encounters a
change in contour, the voltage
reading will change in the
potentiometer and the header
height control system will react
to maintain the target set height
selected by the operator. Drag
rods are most commonly used
in small grains in Auto Tilt
mode which automatically tilts
the platform from side to side
and the operator manually
controls the header raise and
lower.
6