AGCO 3300 Command, Settings Manual

Page: 38 / 64

© 2014 AGCO Corporation
Troubleshooting / Quick Tips

Harvesting uneven, rolling terrain in flex mode
– Decrease cutterbar pressure to the minimum setting (450 – 500 PSI) to provide
maximum flexibility of the cutterbar.
– Increase automatic header height control and automatic tilt sensitivities to provide
faster response in rolling terrain.
– Slow down and allow header height control system to react when crossing
terraces, ditches, or any other uneven field terrain.
– Ensure the guard angle is slightly pitched back to limit potential to gouge cutterbar
in the ground
36