20
AGC Stopray SMART
–
Processing Guide
–
Version 4.1
–
May 2020
11
Use in Structural glazing
When installation or assembling is by mechanical methods, structural glazing or other techniques, tests
for compatibility and adherence of the coating or the adhesive must be made in each case with the
adhesives manufacturer.
AGC specific brochure “ SEALANT COMPATABILITY – Technical information for Stopray SMART products”
available on
describes these conditions. Contact AGC Technical Advisory Service for
further information (
). The described instructions must be strictly respected and
executed.
12
Identifying the coated surface
Before the shaping process, the coated side can easily be identified by the cut which is visible on the
edge of the glass.
After shaping, and before assembled in a double glazing unit, the coating may be identified by using
an electric tester.
Edge side with ripple mark
(cutting line) is the Coating
surface
