AGA LUDLOW ECG Installation, Servicing And User Operating Instructions Download Page 5 | Manualshive

Page: 5 / 61

background image

GB & IE

5

1. General Notes - Important Please Read

This AGA Stoves gas appliance is a High Efficiency, Balanced Flue Log Fuel Effect appliance. It provides
radiant and convectional heat using the latest burner technology, as well as having a variable heat output.



Before Installation, check that the local distribution conditions, nature of the gas and pressure, and

adjustment of the appliance are compatible.



This appliance is intended for use on a gas installation with a governed meter.



This Gas Installation

may only be installed by a registered professional competent person

(Gas Safe Registered and Qualified Installer in the UK)

. The installation must adhere to the

requirements of the local and national Building regulations and national standards. This installation
manual must also be followed.



Ensure that the Flue Terminal is not in any way obstructed and is clear of vegetation, i.e. trees,

shrubs etc. and that no objects are leant against the terminal or guard.



Always clean the Window Panels before the fire is ignited. Any finger prints must be
removed, as these will be burnt into the glass and will be un-removable.



Do not operate this appliance if the glass panel has been broken (or cracked), removed or with

firebox access panels open.



Only flue approved by AGA Stoves for this appliance may be used.



This appliance is a balanced flue product and is room sealed and as such requires no additional

ventilation for operation. However an adequate supply of fresh air to maintain temperatures and a
comfortable environment is recommended



This appliance is designed as a heating appliance, and as such will get very hot in operation; all

surfaces are considered to be working surfaces and as such should not be touched. The front door
window and surrounds are not considered to be fully secure guards against accidental contact. It
is recommended that an approved fire screen be used if children, the elderly or persons with limited
mobility are to be present in the same area.



Do not place curtains, laundry, furniture etc. within a safe distance of 1000mm (HOT ZONE) of this

appliance when in operation



Do not attempt to burn rubbish on this appliance.



Only use the AGA approved and AGA supplied Ceramic Logs and embers



If this appliance is extinguished (turned off), on purpose or otherwise, no attempt to relight should

be made within 3 minutes as the thermocouple inside the stove needs to reset automatically when
the firebox heat reduces accordingly



Each stove burner has been fully tested before being dispatched, the complete Gas Burner

Assembly which includes the Pilot Assembly, Gas Control Valve (GCV) and Remote Control
Handset have all be thoroughly tested and approved

«
...
3
4
5
6
7
...
»

Summary of Contents for LUDLOW ECG






























































Reviews:

No comments

Related manuals for LUDLOW ECG

Brand: J. A. Roby Pages: 3

Brand: Qlima Pages: 120

Brand: J. A. Roby Pages: 29

Legion EST-534T-10

Brand: HAMPTON BAY Pages: 42

Brand: Defy Pages: 18

Brand: EverHot Pages: 14

Brand: Jata Pages: 32

Brand: Hamlet Pages: 22

Brand: Daiwa Pages: 17

Brand: DI Lusso Pages: 24

Brand: Saey Pages: 64

Pellet Stove Hybrid 22 kW

Brand: Termodinamik Pages: 42

Brand: Haas+Sohn Pages: 7

HSP 7 DIANA GRANDE RLU 451.08

Brand: HAAS + SOHN Pages: 23

Brand: HWAM Pages: 8

3277 EasyFuel II EF

Brand: Primus Pages: 4

Brand: Vogelzang International Pages: 13

Brand: Harbor Freight Tools Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands