b)
Isolate the gas supply and connect 8mm diameter pipework up to the approximate position
for final connection to the hob unit. (See Fig. 4).
4
.
Prepare the route for the electrical cable as follows:-
(Refer to wiring diagram Fig. 19 - Page 14).
Decide whether the mains is to enter from the back or side of the hotcupboard. Knock out
or drill appropriate holes and fit grommets (supplied with hob unit). (See Fig. 3).
5.
Place blanking plate AG2M210711 (supplied with hob) on top of the oven so that the return
is to the left and facing upwards. (Fig. 5).
Push return edge up to hotcupboard body and drill through the two holes using a 3.2mm
diameter drill.
Secure the plate with the No.8 self tapping screws provided. (See Fig. 5).
7
140
830
Fig. 4
Fig. 5
DESN 512062
DESN 511722
REAR OF
HOTCUPBOARD
REAR ENTRY
GAS PIPE
SIDE ENTRY
GAS PIPE
Summary of Contents for FFD
Page 15: ...15...
