15
DESN 516552
7.
The hotcupboard top plate is set 5mm higher than the AGA eR7 top plate. This is to prevent
damage to the enamel during installation. Lower the top plate using the adjusters (
Fig. 3.8
and
Fig. 3.9
).
DESN 516554
6.
Slide hotcupboard onto plinth until rear tongue bracket engages fully into rear of base slot, (
Fig.
3.7
). Ensure the appliance is aligned squarely with the plinth then proceed to engage the front
tongue bracket into the slot on the underside of the base plate. Once satisfied that the front
tongue bracket is engaged fully lock it into place by tightening the two M6 screws fully.
Fig. 3.7
Fig. 3.8
5mm Height
Difference
Summary of Contents for eR7 100-3
Page 3: ...ii ...
